Tesla NACS Charging Plug Dock | 3D Printed Corner Mount Holder

A compact parking spot for your Tesla/NACS charging plug. Keep your charging connector neatly stored when it isn't in use with this purpose-built, 3D printed corner-mount dock. Its angled receptacle lets you guide the plug in at approximately 30–40° and rest it at approximately 45°.

Why choose this corner dock?

• Designed for NACS / SAE J3400 charging handles, the North American-style connector used by Tesla vehicles.
• Corner-mounted design: Attaches to the left and front faces of a suitable wooden post or structural corner for discreet garage placement.
• Simple plug storage: Holds the charging handle in an angled resting position when not charging.
• No moving parts: Compact, straightforward 3D printed construction.
• Made to order in Canada: Choose Black or White.

Fit and installation

Requires three #6 × 3/4 in. flat-head wood screws (not included). Attach securely to a suitable solid wood corner, using fasteners appropriate to your mounting surface. This design is intended for the left-and-front corner arrangement shown in the photos, rather than a conventional flat wall.

1. Position the dock on the left/front corner of the mounting surface.
2. Start all three screws loosely through the mounting holes.
3. Tighten the screws evenly without overtightening the printed part.
4. Insert the NACS connector at an angle and confirm that it rests securely.

Compatibility: For North American NACS (SAE J3400) style charging connectors. Not compatible with European IEC Type 2 plugs. Confirm your specific charging-handle shape before ordering. Install away from moving garage-door tracks, mechanisms and pinch points. Mount indoors or in a protected area; print-material performance varies with outdoor UV and heat exposure.

What's included: One 3D printed charging plug corner dock only. Charging cable and mounting screws are not included. Colours: Black or White. The yellow dock in demonstration photos is a prototype colour and is not offered as a variant.

Independent aftermarket accessory made by Greatestwoodsman. Tesla is a trademark of Tesla, Inc.; this product is not affiliated with, endorsed by or supplied by Tesla. This is a passive holder, not an electrical charger.